 |
|
North American Stability Design Criteria"
Contains over 50 papers presented during the annual SSRC Task Group meetings and a special NSF Sponsored Theme Session on "North American Stability Design Criteria". The 730 page book highlights the research of 21 SSRC task groups, 25 technical session papers, and 4 theme session papers. These papers represent both current ongoing research as well as research that has been recently completed in twelve of the seventeen SSRC Task Group areas. The following topics are covered: frame stability and second-order inelastic analysis for frame design; beams and tubular; composites; angle members and bracing members; thin-walled metal construction, stability under seismic loading; plate and box girders, including horizontally curved girders.
(ISBN 1-879749-64-5
MEMBERS: $55.00
NON-MEMBERS: $60.00
Order Now!
Contents
Steel-Concrete composite Beams Curved in Plan by V. Thevendran, S. Chen, N.E. Shanmugam, and J.Y. Richard Liew
Seismic Performance of Composite Substructures with Full and Partial Shear Connection by O.S. Bursi and G. Gramola
Axial Compression Tests of Duragal Angles by D. Popovic, G.J. Hancock, and K.J.R. Rasmussen
Effects of Material Properties of Single Angle Compactness Requirements by C.J. Earls and T.V. Galambos
Additional Residual Stress and Yield Stress Tests on Hot-Rolled Angles by Murty K.S. Madugula, Raymond Haidar, Gerard R. Monforton, and Donald G. Marshall
Inelastic Lateral Buckling of Semi-Continuous Steel Frame Structures by Marian A. Gizejowski and John P. Papangelis
Second-Order Effects in Pitched Roof Steel Frames by Nano Silvestre and Dinar Camotim
Un-Intuitive Deformation in Steel Braces Under Cyclic Loading by Wenshui Gan and John F. Hall
Buckling and Postbuckling Analysis of a Low Parabolic Arch by George T. Michaltsos, D.S. Sophianopoulos, and Theodor G. Konstandakapoulos
The Non-Linear Integrated Design and Analysis Method for Practical Steel Frames by Siu Lai Chan and Zhi Hua Zhou
Influence of Corner Radii on Local Buckling by Cedric Marsh
Ultimate Strength and Ductility of Welded H-Section Members Made of High-Strength Steel with Low-Yield-Ratio by T. Yamao, K. Iwatsubo, and T. Sakimoto
Tubular Section Bars with Flatened (Stamped) Ends Subjected to Compression - A Theoretical and Experimental Analysis by Roberto M. Goncalves, Maximilliano Malite, and Jose Jairo de Sales
Experimental Measurements Versus Numerical Results from Deeply Dented 12 Inch (304.8 mm) Diameter Steel Pipe by Samaan G. Ladkany and Rajkumar Rajagopalan
Effects of Internal Pressure on Axial Compressive Strength of Cylinders and Cones by Clarence D. Miller, Stephen W. Meier, and William J. Czaska
Axial Crushing Strength of Round Tubes by P.K. Basu and X.H. Lou
Finite Element Predictions of Moment Rotation for Endplate Bolted Connections by M.R. Bahaari and A.N. Sherbourne
Beam-Column End Plate Connections - A Theoretical and Experimental Analysis by Luiz F.L. Ribeiro, Toshiaki Takeya, and Roberto M. Goncalves
Some Observations of the Effects of Corrosion on the Ductility of Steel Members and Components by Michael Bruneau and Seyed M. Zahari
Finite Element Modelling of Steel Plate Shear Walls by Robert G. Driver, Geoffrey L. Kulak, D.J. Laurie Kennedy, and Alaa E. Elwi
Simplified Methods of Analysis for Cyclic Behavior of Steel Box Beam-Columns by Tatsuro Sakimoto and Hiroshi Watanabe
Performance of High Strength Steel Flexural Members Subjected to Inelastic Cyclic Loading by Perry S. Green, James M. Ricles, and Richard Sause
Degradation of Strength Resulting From Corrosion of Girder Webs by Deena K. Dinno and Peter C. Birkemoe
The Bearing Resistance of Webs: A Plate Post-Buckling Strength Problem by Stephen J. Kennedy, D.J. Laurie Kennedy, K.R. Prabha, Doyle Prowse, and Xinhua Ji
Nonlinear Finite Element Modelling of Curved Girders: An Ultimate Strength Investigation by Michael D. Simpson and Peter C. Birkemoe
Moment-Rotation Relationships for Inelastic Design of Steel Girder Bridges by Karl E. Barth and Donald W. White
Solutions for Problems of Lateral Torsional Buckling of Composite Beams by Joachim Lindner
Cyclic Behavior of Composite CFT Column-WF Beam Connections by James M. Ricles, Le-Wu Lu, and Shih-Wei Peng
Inelastic Buckling of Steel Beams with Central Torsional Restraints by J. Valentino, Y.-L. Pi, and N.S. Trahair
The Local Buckling Strength of Partially Stiffened Stainless Steel Compression Elements in Beam Flanges by W. Reyneke and G.J. van den Berg
Shear Behavior of Coped Web Elements of Cold-Formed Steel C-Sections by E.N. Koka and R.A. LaBoube
Low-Cycle Behavior of Isolated Bolted Tee Stubs and Extended End Plate Connections by O.S. Bursi and R. Zandonini
Imperfections in Steel Structures by Russel Q. Bridge and Paul Bizzanelli
Investigation of Plastic Instability of Laterally Loaded Frames by F.E. Ralph, H. Sidhu, and C.G. Daley
Stability of Laterally Restrained Columns by Francois Cheong-Siat-Moy
Buckling and Bracing of U-Shaped Girders by Christopher Gilchrist and Joseph A. Yura
Bracing Considerations in Standing Seam Roof Systems by Donald R. Sherman and James M. Fisher
Post-Buckling Behavior of Long Rectangular Plates Under Axial Compression by Jiro Suzuya
Development of Tube-in-Tube Type FLD Bracing Member (Force Limiting Device) and It's Impulsive Analysis by Katsuhiko Imai, Nobuyuki, and Yasuyoshi Umezu
Slenderness Limits for Stainless Steel Elements in Compression by P.J. Bredenkamp, G.J. van den Berg, and P. van der Merwe
The Treatment of Buckling in Recent Aluminum Codes by Cedric Marsh
On Inelastic Buckling of High Strength Steel Beams Under Moment Gradient by Christopher J. Earls, Theodore V. Galambos, and Jerome F. Hajjar
1997 Theme Session - North American Stability Design Criteria
Canadian Design Criteria for Cold Formed Steel Structures (Major Changes in CSA-S136-94) by Reinhold M. Schuster
Canadian Design Criteria for Steel Structures by D.J. Laurie Kennedy
Compression Member Design in the 1996 AISI Specification by Roger L. Brockenbrough
S-Shaped and Channel Cold-Formed Steel Members by Eduardo d.M. Batista, Francisco C. Rodrigues, Arlene C. Sarmanho, and Paulo Esteves, Jr.
Design Models and Interaction of Imperfections in Steel Structures by Zbigniew K. Mendera
Local Buckling of T-Beams Under Cyclic Bending by Mark S. Ellison and Edmundo Corona
A Future for Codes by J. Colin Taylor and Patrick J. Dowling
Toward Advanced Analysis of Three-Dimensional Steel Frameworks by N.V.V. Phani Kumar and D.W. White
Design Consideration for the Inelastic Behavior of Steel Frames Due to Foundation Settlements by M.B. Wong
Finite-Element Geometric Stiffness Matrix Lumping by Numerical Integration by Suhhir J. Shah
Author Affiliation
Reference Index
Subject Index
|
|
