 |
|
The 2002 SSRC Annual Stability Conference was held on 24 - 27 April, 2002,
in Seattle, Washington. This conference was the hosted by the AISC's North
American Steel Construction Conference. This 620 page book contains papers
covering reports of current research activities germane to the various SSRC
task groups and task reporters.
(ISBN 1-879749-69-6)
MEMBERS: $45.00
NON-MEMBERS $50.00
Order
Now!
Contents
PROPOSED NEW PROVISIONS FOR FRAME STABILITY USING SECOND-ORDER ANALYSIS by
Gregory G. Deierlein, Jerome F. Hajjar, Joseph A. Yura, Donald W. White,
William F. Baker
CYCLIC BEHAVIOR OF STEEL SHEAR WALL SYSTEMS by Abolhassan Astaneh-Asl,
Qiuhong Zhao
BEHAVIOR OF BUILT-UP SHEAR LINKS UNDER LARGE CYCLIC DEFORMATIONS by Peter
Dusicka, Ahmad Itani
BRACING REQUIREMENTS FOR INELASTIC STEEL BEAMS by Joseph A. Yura, Guzhao Li
STABILITY OF CURVED STEEL I-GIRDER BRIDGE COMPONENTS DURING ERECTION by
Brandon W. Chavel, Christopher Earls
STABILITY OF HORIZONTALLY CURVED I-GIRDER WEB PANELS by James S. Davidson,
Chai H. Yoo
FIELD STUDIES OF MODERATELY CURVED STEEL BRIDGES DURING CONSTRUCTION;
RESEARCH IN PROGRESS by Daniel G. Linzell, Jeffrey A. Laman, Bradley J.
Bell, John A. Lobo
POST-BUCKLING BEHAVIOR, IMPERFECTION-SENSITIVITY AND MODE INTERACTION IN
PITCHED-ROOF STEEL FRAMES by Nuno Silvestre, Dinar Camotim
EXPERIMENTAL FULL-SCALE TESTS OF SEMI-RIGID STEEL FRAMES by Miklos Ivanyi
NONLINEAR THERMAL RESPONSE OF STEEL FRAMES by Kai Chen, Prodyot K. Basu
SINGLE ANGLE COMPRESSION MEMBERS LOADED THROUGH ONE LEG by Natalie Smusz
Mengelkoch, Joseph A. Yura
ANALYSIS AND DESIGN OF HIGH STRENGTH SQUARE CFT BEAM-COLUMS by Amit H.
Varma, James Ricles, Richard Sause
FABIRCATION OF SMALL MODELS OF LARGE CYLINDERS WITH EXTENSIVE WELDING FOR
BUCKLING EXPERIMENTS by Jin-Guang Teng , Xiang Lin
LATERAL-TORSIONAL BUCKLING OF WIDE FLANGE CANTILEVER BEAMS by Bo Dowswell
LATERAL BRACING OF BRIDGE GIRDERS BY PERMANENT METAL DECK FORMS by Charles
A. Jetann, Todd A. Helwig, Richard Lowery
DESIGN METHOD FOR LATERAL TORSIONAL BUCKLING OF CHANNEL SECTIONS by Dagowin
la Poutre, H.H. Snijder, J.C.D. Hoenderkamp
LOCAL BUCKLING BEHAVIOR OF ORTHOTROPIC STEEL DECK STIFFENED BY U-SHAPED
STIFFENERS by Kuo-Chen Yang, Sheng-Jin Chen
INTERACTION BUCKLING OF STIFFENED STEEL PLATES by Gilbert Y. Grondin, E.
Wang, A.E. Elwi
SHEAR STRENGTH AND STABILITY OF HIGH PERFORMANCE STEEL CORRUGATED WEB
GIRDERS by Hassan Abbas, Richard Sause, Robert G. Driver
WARPING CONSTANT CW EVALUATION BY GENERALIZED WARPING TORSION FORMULATION by
Marcio da Silva, Mauro Schulz, Filip Filippou
PLASTIC BENDING CAPACITY OF LATERALLY SUPPORTED ALUMINUM BEAMS by Yongwook
Kim, Teoman Pekoz
BEHAVIOR OF STEEL-CONCRETE COMPOSITE PLATE GIRDERS by N.E. Shanmugam, K.
Baskar
POSTBUCKLING STRENGTH OF STEEL BOX GIRDER FLANGES by Dong Y. Yoon, Sung C,
Lee, Chai H. Yoo
SANDWICH PLATE SYSTEM RISERS FOR STADIA by Dale Braun, Stephen J. Kennedy,
D.J. Laurie Kennedy, David E. Allen
LATERAL-TORSIONAL BUCKLING OF ALUMINUM TAPERED BEAM-COLUMNS by Gabriel
Jimenez-Lopez, Theodore V. Galambos
ELASTIC BUCKLING OF HORIZONTALLY CURVED STEEL BOX GIRDER FLANGES UNDER
COMPRESSION AND SHEAR by Sung C. Lee, Chai H. Yoo, Doo S. Lee
CYCLIC BEHAVIOR OF IN-FILLED COLUMNS by Venkataramani Gayathri, N.E.
Shanmugam, Y.S. Choo
EFFECTIVE LENGTH OF SINGLE ANGLES SUBJECT TO GEOMETRIC AXIS FLEXURE by
Christopher J. Earls
ADVANCED ANALYSIS OF FRAME STEEL STRUCTURES: TOWARDS APPLICATION AS A
CURRENT DESIGN TOOL by Alexandre Landesmann, Eduardo d. M. Batista
ON THE DISTORTIONAL POST-BUCKLING BEHAVIOR OF COLD-FORMED LIPPED CHANNEL
STEEL COLUMNS by Luis Carlos Prola, Dinar Camotim
DYNAMIC STABILITY OF FRAMES UNDER PRESTRESS by Eriks Jekabsons, Prodyot K.
Basu
Keywords
References
|
|
