|
The 2005 SSRC Annual
Stability Conference was held on April 6-9, in Monreal,
Quebec, Canada. This conference was the hosted by the AISC's
North American Steel Construction Conference. This 602 page
book contains papers covering reports of current research
activities germane to the various SSRC task groups and task
reporters.
MEMBERS: $45.00
NON-MEMBERS $50.00
Order
Now!
Contents
STRUCTURAL STABILITY RESEARCH: UNFINISHED BUSINESS by William McGuire
UNDERSTANDING AND CLASSIFLYING LOCAL, DISTORTIONAL AND GLOBAL BUCKLING IN OPEN THING-WALLED MEMBERS by B.W. Schafer, S. Adany
AXIAL CAPACITY OF DEEP Z-SECTIONS by Vinay J. Thottunkal, Chris Ramseyer
ON THE DISTORTIONAL POST-BUCKLING ASYMMETRY OF COLD-FORMED STEEL CHANNEL COLUMNS WITH DIFFERENT STIFFENER CONFIGURATIONS by Nuno Silvestre, Rui Bebiano, Dinar Camotim
CAPACITY OF BUILT-UP COLD-FORMED STEEL AXIAL COMPRESSOIN MEMBERS by Beth Brueggen, Chris Ramseyer
LONGITUDINAL STIFFENERS ON COMPRESSON FLANGES by Chai H. Yoo
STABILITY OF GUSSET PLATES USING THE YIELD LINE METHOD by Bo Dowswell
STRUCTURAL CAPACITY OF CURVED STEEL I-GIRDERS IN A WEB-OUT-OF-PLUMB POSITION by Brandon W. Chavel, Christopher Earls
THE DESIGN AND FIELD MONITORING OF A HORIZONTALLY CURVED STEEL PLATE GIRDER BRIDGE by Daniel E. Domalik, Jason F. Shura, Daniel G. Linzell
FLANGE COMPACTNESS DEFINITION FOR HORIZONTALLY CURVED BRIDGE GIRDERS by James S. Davidson, Mahendrakumar Madhavan
WARPING RESTRAINT AND STEEL FRAME INSTABILITY by Ian MacPhedran, Gilbert Y. Grondin
RESTRAINED WEB-TAPPED COLUMNS: A PRACTICAL DESIGN APPROACH by Gabriel A. Jimenez
STRENTH AND STABILITY SIMULATIONS OF PARTIALLY ENCASED COMPOSITE COLUMNS UNDER AXIAL LOAD by Mahbuba Begum, Robert G. Driver, Alla E. Elwi
STRENGTH OF METAL DECK FORMS USED FOR STABILITY BRACING OF STEEL BRIDGE GIRDERS by O. Ozgur Egilmez, Todd A. Helwig, Reagan Herman
LATERAL BUCKLING AND BRACING OF BEAMS -- A RE-EVALUATION AFTER THE MARCY BRIDGE COLLAPSE by Joseph A. Yura, Widianto
LEAN-ON BRACING FOR STELL BRIDGE GIRDERS WITH SKEWED SUPPORTS by Todd Helwig, Reagan Herman, Chong Zhou
ROTATION CAPACITY REQUIREMENTS FOR CONTINUOUS SPAN STEEL BRIDGE GIRDERS by Jennifer E. Righman, Karl E. Barth
ULTIMATE STRENGTH OF HORIZONTALLY CURVED COMPOSITE I-GIRDER BRIDGE STRUCTURAL SYSTEMS by S.-K. Jung, D.W. White, F. Beshah, W. Wright
DESIGN ANALYSIS OF CURVED I-GIRDER BRIDGE STYSTEM -- AN ASSESSMENT OF MODELING STRATEGIES by C.-J. Chang, D.W. White, F. Beshah, W. Wright
RESIDUAL STRESSES IN HOT-ROLLED ALLOY STEEL SOLID ROUND BARS by Yongcong Ding, Cindy Kumalasari, Murty K.S. Madagula
POST BUCKLING STRENGTH OF STEEL FIBER REINFORCED CONCRETE IN-FILLED LIGHT GAUGE STEEL BOX SECTIONS -- AN EXPERIMENTAL STUDY by S. Senthil Selvan, E. Chandrasekaran, R. Srinivasaraghavan, K. Nagamani
FINITE ELEMENT MODELING OF COLD-FORMED STEEL JOIST SYSTEMS by Beth Brueggen, Chris Ramseyer
ULTIMATE CAPACITY OF CIRCULAR CHORDS AT TUBULAR TRUSS BEARINGS by B. Kozy, C.J. Earls
ELASTIC LATERAL-TORSIONAL BUCKLING BEHAVIOR OF DOUBLY SYMMETRIC TAPERED BEAM-COLUMNS by Anisio Andrade, Dinar Camotim, P. Providencia e Costa
LATERAL STABILITY OF BRACED CURVED I-GIRDER SYSTEMS by James S. Davidson, Mahendrahumar Madhavan
SEISMIC PERFORMANCE EVALUATION OF THIN-WALLED STEEL TUBULAR COLUMNS by Iraj H.P. Mamaghani
MECHANICS OF LATERAL BRACE FORCES IN Z-PURLIN ROOF SYSTEMS by Michael W. Seek, Thomas M. Murray
ELASTIC BUCKLING OF CENTERLING-STIFFENED PLATES SUBJECTED TO A LINEARLY VARYING STRESS DISTRIBUTION by Mahendrakumar Madhavan, James S. Davidson
SHEAR BUCKLING OF LONGITUDINALLY STIFFENED PANELS by Darko Beg, Luka Pavlovcic
STABILITY OF BRACED CYLINDRICAL SHELL GRIDS USING THE SHELL ANALOGY AND THE FINITE ELEMENT METHOD by Samaan G. Ladkany, Vijay K. Doli, Karthik Doppala
ROTATION CAPACITY OF STEEL BOX GIRDERS IN NEGATIVE BENDING by Sung C. Lee, Chai H. Yoo, Dong Y. Yoon
|
